Standards Packages
iTeh together with SIST has developed and compiled a comprehensive collection of standard packages to support your standard requirements. Our packages cover an array of content that includes quality management, risk management, road vehicles, machine safety, and much more. With over 200 packages to choose from, you are sure to find a collection to suit your standard needs.
Latest Standards
This document gives specifications, test methods, sampling, marking and labelling of porcelain tableware that is used for the preparation and serving of foods.
- Standard7 pagesEnglish languagesale 15% off
- Draft8 pagesEnglish languagesale 15% off
- Draft8 pagesEnglish languagesale 15% off
This document specifies functional requirements and reference interfaces for interconnected energy management agents (EMAs) based on the model for an EMA specified in ISO/IEC 15067-3 and the model for multiple interacting EMAs specified in ISO/IEC 15067-3-3. This specification supports energy management by facilitating interactions and information exchange among EMAs and appliances, consumer electronics, heating, ventilation, and air conditioning (HVAC) equipment, water heaters, distributed energy resources (DERs), electric vehicle (EV) chargers, and other loads supplied by public and local power sources in a house or an apartment complex. Local power sources can use DER, which can include, but are not limited to, wind turbines, solar panels, and storage (stationary and mobile). EMAs specified with these functions and interfaces can assist the consumer in responding to price-varying public power and buying or selling transactive energy (TE). This document specifies framework methods for EMAs to co-ordinate the delivery of energy management applications, and the reference interfaces facilitate a communications protocol among interacting EMAs. These linked and interacting EMAs provide energy optimization and conservation within constraints such as a consumer's financial budget and goals for greenhouse gas reduction, while supporting programmes as diverse as TE and demand response (DR).
- Standard13 pagesEnglish languagesale 15% off
This document describes a methodology for calculating the rate of carbon emissions for a software system; that is, its SCI score. The purpose of this score is to increase awareness and transparency of an application's sustainability credentials. The score will help software practitioners make better, evidence-based decisions during system design, development, and deployment, that will ultimately minimize carbon emissions. A reliable, consistent, fair and comparable measure allows targets to be defined during development and progress to be tracked.
- Standard9 pagesEnglish languagesale 15% off
- Draft9 pagesEnglish languagesale 15% off
This document specifies the principles of inductively coupled plasma mass spectrometry (ICP-MS) and provides general requirements for the use of this technique to determine elements in water, digests of sludges and sediments (e.g. digests of water as described in ISO 15587-1 or ISO 15587-2). Generally, the measurement is carried out in water, but gases, vapours or fine particulate matter can be introduced too. This document applies to the use of ICP-MS for aqueous solution analysis. The ultimate determination of the elements is described in a separate International Standard for each series of elements and matrix. The individual clauses of this document refer the user to these guidelines for the basic principles of the method and the configuration of the instrument.
- Standard32 pagesEnglish languagesale 15% off
- Standard34 pagesFrench languagesale 15% off
- Draft34 pagesEnglish languagesale 15% off
- Draft34 pagesEnglish languagesale 15% off
This document specifies a method for the determination of the dry rubber content of natural rubber field latex. The method is not suitable for latices from natural sources other than Hevea brasiliensis, or for compounded latex, vulcanized latex or artificial dispersions of rubber.
- Standard7 pagesEnglish languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
- Draft7 pagesEnglish languagesale 15% off
This document specifies physical medium attachment (PMA) sublayers for the controller area network (CAN). This includes the high-speed (HS) PMA without and with low-power mode capability, without and with selective wake-up functionality. Additionally, this document specifies PMAs supporting the signal improvement capability (SIC) mode and the FAST mode in Annex A. The physical medium dependent (PMD) sublayer is not in the scope of this document.
- Standard64 pagesEnglish languagesale 15% off
- Draft64 pagesEnglish languagesale 15% off
The set of AT Attachment standards consists of this standard and the ATA implementation standards described in AT Attachment - 8 ATA/ATAPI Architecture Model (ATA8-AAM). This standard specifies the command set that host systems use to access storage devices. This standard provides a common command set for systems manufacturers, system integrators, software suppliers, and suppliers of intelligent storage devices. Figure 1 shows the relationship of this standard to other ATA standards as well as related device and host standards and specifications (e.g., SCSI standards and SATA-IO specifications). This standard maintains compatibility with the ACS-4 standard, INCITS 529-2018, while providing additional functions.
- Standard693 pagesEnglish languagesale 15% off
- Draft693 pagesEnglish languagesale 15% off
This document provides specifications for the representation of the following types of genomic information: — unaligned sequencing reads including read identifiers and quality values; — aligned sequencing reads including read identifiers and quality values; — reference sequences.
- Standard160 pagesEnglish languagesale 15% off
- Draft164 pagesEnglish languagesale 15% off
- Draft164 pagesEnglish languagesale 15% off
This document specifies the test method for determining the tack in prepregs under defined conditions. This document is applicable to but not limited to unidirectional and multidirectional thermoset based prepregs made with glass fibres, carbon fibres, aramid fibres and other similar fibres included.
- Technical specification10 pagesEnglish languagesale 15% off
- Draft10 pagesEnglish languagesale 15% off
- Draft10 pagesEnglish languagesale 15% off
This document specifies a protocol for energy management agents (EMAs) to facilitate communications among these agents for demand response (DR) energy management applications. The EMA protocol (EMAP) provides a logical connection among EMAs in community housing such as an apartment building or a campus of houses or apartment buildings. This document also specifies interaction procedures and message formats for DR energy management as introduced in ISO/IEC 15067-3-3. The EMAP supports interactions among EMAs at OSI (Open System Interconnection) layer 7 with a message transfer protocol. An EMA can be embedded in devices such as a thermostat, a smart appliance, or other consumer products. The choice of interconnection depends on the system and the network topology, which can be arranged in a mesh or hierarchical tree structure. An intermediate EMA may relay messages sent between EMAs.
- Standard38 pagesEnglish languagesale 15% off
- Guide18 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60364-7-716:2023 specifies requirements in electrical installations for the distribution of ELV DC power using balanced, information technology cables and accessories primarily designed for data transmission, as specified in terms of a category within the channels of ISO/IEC 11801-1 using power sourcing equipment in accordance with IEC 62368-3.
Requirements are included for the design, erection, and verification of telecommunications infrastructure for the purpose of both telecommunications and distribution of ELV DC power. In addition, requirements are included for use of existing telecommunications infrastructure for distribution of ELV DC power.
The power delivery systems include, but are not restricted to, the Power over Ethernet systems specified by IEEE 802.3.
This document does not apply to the use of cables and accessories within the core and access networks for example private branch exchange (PBX).
- Standardization document14 pagesEnglish languagesale 10% offe-Library read for1 day
This part of EN 45545 specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles.
The objective of the measures and requirements, specified in this part of EN 45545, is to protect passengers and staff in railway vehicles in the event of a developing fire on board.
Use of a Fire Containment and Control System, where permitted as an alternative to a fire barrier, is not in the scope of this part of EN 45545. It is not within the scope of this part of EN 45545 to describe measures that ensure the preservation of the railway vehicles in the event of a fire.
- Standard24 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft22 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 61970-302:2024 specifies a Dynamics package which contains part of the CIM to support the exchange of models between software applications that perform analysis of the steady-state stability (small-signal stability) or transient stability of a power system as defined by IEEE / CIGRE, Definition and classification of power system stability IEEE/CIGRE joint task force on stability terms and definitions.
The model descriptions in this document provide specifications for each type of dynamic model as well as the information that needs to be included in dynamic case exchanges between planning/study applications.
The scope of the CIM Dynamics package specified in this document includes:
• standard models: a simplified approach to describing dynamic models, where models representing dynamic behaviour of elements of the power system are contained in predefined libraries of classes which are interconnected in a standard manner. Only the names of the selected elements of the models along with their attributes are needed to describe dynamic behaviour.
• proprietary user-defined models: an approach providing users the ability to define the parameters of a dynamic behaviour model representing a vendor or user proprietary device where an explicit description of the model is not provided by this document. The same libraries and standard interconnections are used for both proprietary user-defined models and standard models. The behavioural details of the model are not documented in this document, only the model parameters.
• A model to enable exchange of models’ descriptions. This approach can be used to describe user defined and standard models.
• A model to enable exchange of simulation results.
This second edition cancels and replaces the first edition published in 2018. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous edition:
a) The majority of issues detected in IEC 61970-302:2018 are addressed;
b) IEEE 421.5-2016 on Excitation systems is fully covered;
c) The IEEE turbine report from 2013 was considered and as a result a number of gas, steam and hydro turbines/governors are added;
d) IEC 61400-27-1:2020 on wind turbines is fully incorporated;
e) WECC Inverter-Based Resource (IBR) models, Hybrid STATCOM models and storage models are added;
f) The user defined models are enhanced with a model which enables modelling of detailed dynamic model;
g) A model to enable exchange of simulation results is added;
h) The work on the HVDC models is not complete. The HVDC dynamics models are a complex domain in which there are no models that are approved or widely recognised on international level, i.e. there are only project-based models. At this stage IEC 61970-302:2022 only specifies some general classes. However, it is recognised that better coverage of HVDC will require a further edition of this document;
i) Models from IEEE 1547-2018 "IEEE Standard for Interconnection and Interoperability of Distributed Energy Resources with Associated Electric Power Systems Interfaces" are added.
j) Statements have been added to certain figures, tables, schemas, and enumerations throughout the document that indicate that they are reproduced with the permission of the UCA International User Group (UCAIug). These items are derived from the CIM.
- Standard894 pagesEnglish languagesale 10% offe-Library read for1 day
- Corrigendum3 pagesEnglish and French languagesale 10% offe-Library read for1 day
IEC 63203-402-2:2024 specifies test methods for measuring and evaluating the performance, reliability, and accuracy of the step counting feature in any wearable device that can count steps (e.g. activity and fitness trackers, smart bands, smart shoes, and smart insoles).
These standard test methods exclude the evaluation of data associated with travel distance or calorie consumption.
- Standard21 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft18 pagesEnglish languagesale 10% offe-Library read for1 day
This document establishes high-level requirements for privacy by design to protect privacy throughout the lifecycle of a consumer product, including data processed by the consumer.
This document does not contain specific requirements for the privacy assurances and commitments that organizations can offer consumers nor does it specify particular methodologies that an organization can adopt to design and-implement privacy controls, nor the technology that can be used to operate such controls.
- Standard45 pagesEnglish languagesale 10% offe-Library read for1 day
- Standard37 pagesEnglish languagesale 15% off
- Draft37 pagesEnglish languagesale 15% off
- Draft37 pagesEnglish languagesale 15% off
This standard specifies generic cabling for homes. A home can contain one or more buildings or can be within a building that contains more than one home.
It covers balanced cabling, optical fibre cabling, and coaxial cabling.
This standard specifies generic cabling for two groups of applications:
- Information and Communications Technologies (ICT);
- Broadcast and Communications Technologies (BCT).
This standard specifies directly or via reference to EN 50173 1 the:
- structure and minimum configuration for generic cabling within homes;
- interfaces at the telecommunications outlet (TO) and broadcast outlet (BO);
- performance requirements for cabling links and channels;
- implementation requirements and options;
- performance requirements for cabling components;
- conformance requirements and verification procedures.
This standard has taken into account requirements specified in application standards listed in EN 50173 1.
Safety and electromagnetic compatibility (EMC) requirements are outside the scope of this standard and are covered by other standards and regulations. However, information given in this standard can be of assistance in meeting these standards and regulations.
- Amendment43 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60794-1-311:2024 describes test procedures to be used in establishing uniform requirements of optical fibre cable elements for the mechanical property – tensile strength and elongation at break. This document applies to optical fibre cables for use with telecommunication equipment and devices employing similar techniques, and to cables having a combination of both optical fibres and electrical conductors. Throughout the document, the wording "optical cable" can also include optical fibre units, microduct fibre units, etc.
This document partially cancels and replaces IEC 60794-1-23:2019. This edition includes the following significant technical changes with respect to IEC 60794‑1‑23:2019:
a) The information about dumb-bells is removed because this is not used for testing cable elements;
b) the parameters strain at yield and E modulus are added in 5.7.
- Standard14 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft10 pagesEnglish languagesale 10% offe-Library read for1 day
IEC 60794-2-23: 2024 is a detail specification and specifies indoor multi-fibre cables for use in MPO (multi-fibre push on) connector terminated cable assemblies.
- Standard19 pagesEnglish languagesale 10% offe-Library read for1 day
- Draft16 pagesEnglish languagesale 10% offe-Library read for1 day
Benefits
Full Standards Solution
Our catalog includes not only latest standards but also full meta information about related standardization project lifecycle.
Cost Effective
Our PRICE MATCH GUARANTEE policy with multi-level volume discounts gives our clients the best option in the market. In addition, you can get access to the standards for 3, 10, or 30 days.
Stay Notified
Get alerted to the latest revisions and new standards in the Weekly Newsletter. Standards are constantly changing. Don’t miss a revision that can impact your business.
6 Reasons Why We are The BEST at What We Do
Compliance with international standards is increasingly becoming one of the key competitive advantages in the global market. Our company creates all conditions for the most comfortable implementation of new documents and norms in the processes carried out by your organization. Some of the key advantages of working with us are:
- Cost-effective - multi-level discounts and permanent updates of the functions give our clients the best option on the market.
- e-Library - access to standards for a period of time of your choice. It is a cost-effective solution for keeping updated with the newest standards.
- Company-wide documents - create a company account and connect all employees with access to purchased standards, e-Library documents, and packages.
- All in one spot - all purchased standards are kept in one place with controlled access by the account administrator.
- Client-centric - providing quality consulting is the prerogative and incentive to create new products that accompany your success and scale.
- 24 / 7 client support
We are dedicated to building mutually beneficial and long-term relationships with our clients. That is why our team focuses on creating services to help our customers develop and achieve new productive results.
About Us
iTeh Inc is a software development and IT consulting team of professionals who provide consulting, development and implementation of solutions for all types of businesses.
In cooperation, with the Slovenian Institute of Standardization (SIST), we create a unique solution that covers all aspects of the lifecycle of Standardization organizations. iTeh Standards is a part of the solution that helps SIST to provide and sell their products to Customers.
iTeh Standards Store is an evolving project, our goal is to build long-term relationships with our customers. We believe in delivering quality services to solve our customers' challenges and define success by exceeding our customers' expectations. We are always ready to listen and our experience allows us to provide our customers with helpful effective suggestions. You can contact us by email.
We are committed to providing the best possible experience for our customers.